Internet Discount Bargain Shopping

The AIMS Power 2000 Watt Pure Sine Low Frequency Inverter has a built-in battery charger and transfer switch. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. From off-grid home or business back up power systems to campsites, tailgating parties or solar systems. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home. This inverter charger is capable of a 6000 watt surge for 20 seconds and can run at 2000 watts continuously. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will "sleep" and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it. Features: 2000 watt low frequency inverter6000 watt surge for 20 seconds -3x surge capabilityBattery Priority SelectorTerminal BlockGFCI - 15 ampsMarine Coated and ProtectedMulti Stage Smart charger 70 AmpRemote panel availableAuto gen startAuto frequency10msec typical transfer time7 battery type settings for chargerSselectable 25W power save mode (hibernation)ETL Listed to UL 458 Standards and CSA 22.2 No 107.1 Output Specifications: Continuous Output Power: 2000 WattsSurge Rating: 6000 Watts (20 Seconds)Output Waveform: Pure Sine/Same as input (Bypass Mode)Output Voltage: 100-110-120VacNominal Efficiency: >92% (Peak)Line Mode Efficiency: >95%Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3HzTypical Transfer Time: 10ms (Max)Bypass terminal breaker-30 ampsTHD: < 10% DC Input Specifications Nominal Input Voltage: 12.0VdcMinimum Start Voltage: 10.0VdcLow Battery Alarm: 10.5Vdc-11.0VdcLow battery Trip: 10.0Vdc-10.5VdcHigh Voltage Alarm: 16.0VdcLow battery Voltage Restart: 13.0VdcIdle Consumption: 28 wattsCharger breaker-20 ampsPower Saver Mode Idle Consumption: <12.7 watts Charger Specifications Output voltage: Depends on battery typeCharger Rate: 70A Dimensions: Unit Size L x W x H: 15.35"x 11"x 7"<Li>Shipping L x W x H: 20.5"X 13.8"X 12.2"Unit Weight: 47.4 lbs.Shipping Weight: 55 lbs.